Pipe Conveying System for Bevel Cutting Machine
Model: PLTPS-24D1/D2
Performance features
Conveying the pipe automatically or manually when the bevel cutting machine works and the pipe can be removed from the machine with a turnover mechanism if necessary.
It increases the automatization level in the pipe fabricating plant and decreases the hazards during hoisting.
Technical parameters
Pipe diameter applicable: DN50~600(φ 60~610)
Conveying length: Feed in end≥ 1, 000MM; Feed out end≥ 500MM
Line length: 7.5M at Feed in end and 7.5M at Feed out end (or depend on situation)...
Line height: 800MM
Material of the roller bench: Carbon steel with blue treated surface (coated with rubber if necessary)
Conveying speed: 2~20M/Min
Speed-regulation Mode: Manual/VF stepless speed adjustment
Control system: Manual/PLC control, shared with the pipe cutting length-fixing system (or depends on the situation).
Turnover mechanism: Nil (or depends on the situation)
Lifting system: A lifting system could be equipped if required so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter.
| Description |
Details |
| Pipe diameter |
DN50~600(& phi; 60~610) |
| Conveying length |
Feed in end& ge; 1, 000MM; Feed out end& ge; 500MM Line length: 7.5M at Feed in end and 7.5M at Feed out end (or depend on situation)... |
| Line height |
800MM |
| Conveying speed |
2~20M/Min |
| Lifting system |
a lifting system could be equipped if required so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter. |
Audited Supplier 
){kind=link}
){kind=link}