Performance features
Conveying the pipe automatically or manually when the end beveling machine works and the pipe can be removed from the machine with a turnover mechanism if necessary.
It increases the automatization level in the pipe fabricating plant and decreases the hazards during hoisting.
Technical parameters
Pipe diameter applicable: Dn50~600(Φ 60~610)
Conveying length: ≥ 500mm
Line length: 7.5m (or depend on the situation)
Line height: 800mm
Material of the roller bench: Carbon steel with blue treated surface (coated with rubber if necessary)
Conveying speed: 2~20m/min
Speed-regulation mode: Manual/vf stepless speed adjustment
Control system: Non-PLC control (or depends on situation)
Turnover mechanism: Nil (or depends on the situation)
Lifting system: A lifting system is equipped so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter.
Turning system: A turning system is equipped so as to turn pipe automatically and to bevel the two end of pipe(option).
Pipe diameter applicable: |
Dn50~600(Φ 60~610) |
Conveying length: |
≥ 500mm |
Line length: |
7.5m (or depend on the situation) |
Line height: |
800mm |
Material of the roller bench: |
Carbon steel with blue treated surface (coated with rubber if necessary) |
Conveying speed: |
2~20m/min |
Speed-regulation mode: |
Manual/vf stepless speed adjustment |
Control system: |
Non-PLC control (or depends on situation) |
Turnover mechanism: |
Nil (or depends on the situation) |
Lifting system: |
A lifting system is equipped so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter. |
Turning system: |
A turning system is equipped so as to turn pipe automatically and to bevel the two end of pipe(option). |
|
|