Fixed-type High Speed Pipe Cutting & Beveling Machine
Model: FPCBM-12A
Performance features
On-line Performance: Good (designed as per the on-line equipment of the production line)
Beveling Capacity: ≤ 5Min /two pipe bevels (DN200 SCH40)
Bevel cutting: Cutting off pipe and two bevels simultaneously.
Bevel quality: Good
Cutting surplus: It is unnecessary so the material can be saved
Mobility: Low
Application: Used for cutting large amount of pipes with standard wall thickness or thin wall thickness and beveling theV-shape bevel.
Technical parameters
Pipe diameter applicable: DN50~300(φ 60~325)mm
Pipe wall thickness applicable: 3~12MM
Materials applicable: Carbon steel, alloy steel, stainless steel and cryogenic steel
Bevel Shape: V
Structure: A four column suspending structure is adopted. Since it is hollow, the pipe can goes into the machine directly and fixed there. The cutter rotates and cuts the pipe circumferentially with high speed.
Cutting direction: Lengthwise
Driven by: Motor
Clamping system: Clamped by cylinder
Control System: PLC VF control and Touching Screen with man-machine interface
Length-measuring system: A mechanical Length- measuring system could be provided if necessary so as to measure the length of the pipes as well as cut and bevel them with the supporting of the conveying system of the cutting and beveling machine.
Mechanical aligning: A automatic lifting and lowering device is equipped to adjust automatically the center elevation of the beveling machine, so the pipes with different diameters get the same bottom elevation on the production line to get the pipes in/out of the machine easily.
Conveying system: Cutting and beveling conveying systems are equipped at front and rear sides of the beveling machine if necessary.
| Description |
details |
| pipe diameter |
DN50-300 |
| Pipe wallthickness |
3-12mm |
| bevel type |
v |
Audited Supplier 
){kind=link}
){kind=link}